Categories

Contact Us

Taizhou Feida Machine Tool Co.,Ltd
Add:Muyu Industrial zone, Wenling city, Zhejiang province, China
Tel:+86-576-86470117
Fax:+86-576-8647017
Ph:+8615057275975
E-mail:sales@tzfeida.com

Air Plasma Cutter for Professional Cutting in DC

Air Plasma Cutter for Professional Cutting in DC

There are 3 main configurations of CNC Plasma Cutting, and they are largely differentiated by the forms of materials before processing, and the flexibility of the cutting head. 2 Dimensional / 2-Axis Plasma Cutting This is the most common and conventional form of CNC Plasma Cutting. Producing flat profiles, where the cut edges……

Send Inquiry

Product Details

Model Number: LGK-40/63/100/120

Technical Specifications of Air Plasma Cutter for Professional Cutting in DC
PAGE 49_编辑.png

Introduction of Air Plasma Cutter for Professional Cutting in DC

There are 3 main configurations of CNC Plasma Cutting, and they are largely differentiated by the forms of materials before processing, and the flexibility of the cutting head.

2 Dimensional / 2-Axis Plasma Cutting

This is the most common and conventional form of CNC Plasma Cutting. Producing flat profiles, where the cut edges are at 90 Degrees to the material surface. High powered cnc plasma cutting beds are configured in this way, able to cut profiles from metal plate up to 150mm thick.up to thickness 30mm

3 Dimensional / 3+ Axis Plasma Cutting

Once again, a process for producing flat profiles from sheet or plate metal, however with the introduction of an additional axis of rotation, the cutting head of a CNC Plasma Cutting machine can tilt whilst being taken through a conventional 2 dimensional cutting path. The result of this is cut edges at an angle other than 90 Degrees to the material surface, for example 30-45 Degree angles. This angle is continuous throughout the thickness of the material. This is typically applied in situations where the profile being cut is to be used as part of a welded fabrication as the angled edge forms part of the weld preparation. When the weld preparation is applied during the cnc plasma cutting process, secondary operations such as grinding or machining can be avoided,reducing cost. The angular cutting capability of 3 Dimensional plasma cutting can also be used to create countersunk holes and chamfer edges of profiled holes.

Tube & Section Plasma Cutting

Used in the processing of tube, pipe or any form of long section. The plasma cutting head usually remains stationary whilst the workpiece is fed through, and rotated around its longitudinal axis. There are some configurations where, as with 3 Dimensional Plasma Cutting, the cutting head can tilt and rotate. This allows angled cuts to be made through the thickness of the tube or section, commonly taken advantage of in the fabrication of process pipework where cut pipe can be provided with a weld preparation in place of a straight edge.

Quick Details of Air Plasma Cutter for Professional Cutting in DC

Input Voltage: 380V
Power(W): /
Usage: Welding
After-sales Service Provided: Overseas third-party support available
Name: Air plasma cutter lgk100
Air pressure: 0.2-0.4Mpa/0.3-0.5Mpa
Protection degree: IP21S


Inquiry