Categories

Contact Us

Taizhou Feida Machine Tool Co.,Ltd
Add:Muyu Industrial zone, Wenling city, Zhejiang province, China
Tel:+86-576-86470117
Fax:+86-576-8647017
Ph:+8615057275975
E-mail:sales@tzfeida.com

DIY Inverter TIG Welder

DIY Inverter TIG Welder

Once the arc is struck, the welder moves the torch in a small circle to create a welding pool, the size of which depends on the size of the electrode and the amount of current. While maintaining a constant separation between the electrode and the workpiece, the operator then moves the torch back slightly and tilts it backward about 10–15 degrees from vertical. Filler metal is added manually to the front end of the weld pool……

Send Inquiry

Product Details

Model Number: TIG-160AR/180AR/200AR

Technical Specifications of DIY Inverter TIG Welder

PAGE 20_编辑.png

Operation of DIY Inverter TIG Welder

Once the arc is struck, the welder moves the torch in a small circle to create a welding pool, the size of which depends on the size of the electrode and the amount of current. While maintaining a constant separation between the electrode and the workpiece, the operator then moves the torch back slightly and tilts it backward about 10–15 degrees from vertical. Filler metal is added manually to the front end of the weld pool as it is needed.Welders often develop a technique of rapidly alternating between moving the torch forward (to advance the weld pool) and adding filler metal. The filler rod is withdrawn from the weld pool each time the electrode advances, but it is always kept inside the gas shield to prevent oxidation of its surface and contamination of the weld. Filler rods composed of metals with a low melting temperature, such as aluminium, require that the operator maintain some distance from the arc while staying inside the gas shield. If held too close to the arc, the filler rod can melt before it makes contact with the weld puddle. As the weld nears completion, the arc current is often gradually reduced to allow the weld crater to solidify and prevent the formation of crater cracks at the end of the weld.

Quick Details of DIY Inverter TIG Welder

Pulse Frequency: 50/60HZ
Pilot Arc Current: 10A
Rated Duty Cycle: 60%
Motor Type: DC Motor
Dimensions: 485*235*330mm
Usage: welding
Voltage: 220V
After-sales Service Provided: Overseas third-party support available
Name: Tig machine
Insulation class: F
Protection degree: IP21S

Packaging & Delivery

Packaging Details
carton
color carton(MOQ:500pcs)
Delivery Time
Shipped in 30 days after payment


Inquiry